1. Attach the Side Wings
Tighten the side wings (R) to headboard (A) as shown.
Instructions by
time4sleep
Savannah Upholstered Drawer Bed Frame
Assembly instructions for Savannah Upholstered Drawer Bed Frame by Time4Sleep
Product Information
Savannah Upholstered Drawer Bed Frame
The Savannah offers a unique take on the upholstered bed with its winged headboard and clean vertical lines. The deep cushioning to the headboard will offer comfortable support. Upholstered in an easy to coordinate luxurious textured weave fabric the Savannah will be a versatile and stylish addition to any bedroom. The bed comes with a sprung slatted base and features practical spacious drawers with one large drawer to the foot and smaller drawers on each side.
- SKU
- Sav46Oat, Sav50Oat, Sav46Mist, Sav50Mist
Tools
Materials
-
-
2. Attach the Legs
Tighten the legs (G) to both footboard (B) as shown.
-
3. Prepare the Side Rails
Attach wood dowel (10) to side rail (C). Tighten the side rail support (F) to the side rail (C) with screws (6) using screw driver (not included).
-
4. Attach Side Rails
Attach side rail (C) to headboard (A) and footboard (B) by pushing the bracket down to fit it.
-
5. Install the Center Support Rail
Attach the support legs (E) to the center rail (D) of the bed as shown. Slide the center rail (D) to the headboard (A) and footboard (B).
ATTENTION: Please keep the adjuster around 5 to 8 mm distant away from the floor.
-
6. Assemble Footboard Drawer
Tighten the footboard side panel (J) to the footboard front panel (H) and footboard back panel (I) with screws (8) using screw driver (not included).
-
7. Add Bottom Panel to Drawer
Slide the footboard bottom panel (K) to the set up drawer.
-
8. Finish Footboard Drawer
Tighten the bottom panel support (O & P) with screws (7) using screw driver (not included). Attach the bottom panel with Nail (13) using the hammer (not included).
-
9. Attach Rollers
Tighten the roller (9) with screws (5) using screw driver (not included).
-
10. Assemble Side Rail Drawers
Tighten the side rail side panel (J) to the side rail front panel (L) and side rail back panel (M) with screws (8) using screw driver (not included).
-
11. Add Bottom Panel to Drawer
Slide the side rail bottom panel (N) to the set up drawer.
-
12. Finish Side Rail Drawer
Tighten the bottom panel support (O & P) with screws (7) using screw driver (not included).
-
13. Attach Rollers
Tighten the roller (9) with screws (5) using screw driver (not included).
-
14. Install the Slats and Drawers
Affix the Stiffener Slat (S) to the side rail support wood and the center rail (D). Tighten all the 4 corner, follow by assembly of the slat holders with LVL slats as shown.
ATTENTION: Prevent the drawer from being pulled out too far and drop. It is optional to choose attach the drawer stopper.