Madison 4 Drawer Wooden Bed Frame

1. Insert Mini Fix Screws (A2) into the Headboard Panel (1) in the marked holes along the top edge.
2. Insert Wood Dowels (B) into each end of the Footboard Top Rail (3), and Wood Dowels (C) into both ends of the Footboard Panel Backing Strip (26).
3. Align the Top Rail (3) and the Backing Strip (26) with the Headboard Panel (1), inserting the dowels and screws into the corresponding holes.
4. Lock all joints by inserting Mini Fix Cam Locks (A1) into the pre-drilled openings and turning them to secure.

1. Insert Mini Fix Screws (A2) into the pre-drilled holes along the edges of the Footboard Panel (2).
2. Attach the Bottom Panel of the Headboard (22) by inserting Wood Dowels (B) into the ends and aligning it beneath the Footboard Panel (2).
3. Join both pieces by carefully pressing them together so the dowels and screws fit into place.
4. Insert Mini Fix Cam Locks (A1) into the corresponding holes on the inside face of the Footboard Panel (2) and twist to lock everything securely.
5. Finally, place the Rear Left Post (23) and Rear Right Post (24) on each end, ensuring alignment with the holes on Panel 22. These will be secured later in the following steps.

1. Insert Mini Fix Screws (A2) into the designated holes on the three Central Divider Panels (6).
2. Attach Wood Dowels (B) into the pre-drilled holes at both ends of the Left Side Panel (4) and Right Side Panel (5).
3. Align the Central Dividers (6) with the Side Panels (4 and 5), fitting the Mini Fix Screws and Dowels into their corresponding holes.
4. Once aligned, insert Mini Fix Cam Locks (A1) into the top holes of the Side Panels and turn them to secure the dividers in place.
5. Confirm that all dividers are evenly spaced and securely fixed before continuing.

1. Insert Mini Fix Screws (A2) into both ends of each divider panel (7 to 12).
2. Insert Wood Dowels (B) into the appropriate holes at each end of the panels.
3. Gently tap in JCBC Screws (G) to strengthen connections in specific panels that require it (as shown in the image).
4. Insert Mini Fix Cam Locks (A1) into each panel to prepare for secure locking when they are assembled with other pieces in the next steps.

1. Insert Mini Fix Screws (A2) into the rear and front edges of each Drawer Front Panel (16) and Drawer Back Panel (17).
2. Insert Mini Fix Cam Locks (A1) into the Drawer Side Panels (18 & 19).
3. Add Wood Dowels (B) into the designated holes of the Drawer Back Panels (17) to later attach the Drawer Side Panels.

Position each part as shown to prep four identical drawer structures. Do not assemble them yet—this is a preparation step.

1. Insert Mini Fix Screws (A2) into the side holes of the Bottom Panel of the Headboard (22).
2. Attach the Rear Left Post (23) and Rear Right Post (24) to each side of panel 22 using Mini Fix Cam Locks (A1).
3. Turn each cam clockwise to lock the connection securely.
4. Cover the cam locks with Cam Lock Covers (A3) for a clean finish.

1. Place the Headboard Panel (1) on top of the Bottom Panel (22), aligning it between the Rear Left Post (23) and Rear Right Post (24).
2. Position both Connector Blocks (25) flush against the rear posts and the Headboard Panel.
3. Secure the Connector Blocks (25) using Screws (F) – 6 screws per block, 3 into the panel and 3 into the post.

1. Insert Cam Dowels (A2) into the pre-drilled holes on the Footboard Top Part (3) and the Headboard Top Part (26).
2. Insert Cam Lock Nuts (A1) into the matching holes on the Footboard Panel (2) and the Headboard Bottom Panel (22).
3. Align the dowels with the lock nuts and press the top rails into place on both the headboard and footboard assemblies.
4. Tighten the Cam Lock Nuts (A1) using a screwdriver to secure both top parts firmly.
5. Cover all exposed cam locks with Cam Lock Covers (A3) for a finished appearance.

1. Insert Wooden Dowels (C) into the pre-drilled holes on both Drawer Rail Support Blocks (13) and (14).
2. Ensure that the dowels are positioned firmly to allow for easy alignment in the next steps.
3. These blocks will later be attached to the inner panels to support the drawer runners.

1. Position the Support Blocks (13 and 14) flush against the inside edges of the Drawer Panels (11 and 12) as shown.
2. Using Screws (F), firmly attach each Support Block to the corresponding Drawer Panel.
3. Double-check that the blocks are aligned and seated properly to ensure the drawer runners can glide smoothly later.

1. Position the drawer runners on the corresponding drawer base panels as shown in the image.
2. Ensure the curved track faces the front edge of each base panel.
3. Use Screws (E) to secure the runners in place.
4. Confirm the runners are aligned properly and move smoothly when tested.

1. Place the drawer backs flat with the pre-drilled holes facing upward.
2. Attach the L1(R) runner to each Drawer Back 11.
3. Flip one Drawer Back 12 and attach L1(L) to the inner side.
4. Attach the second L1(R) runner to the remaining Drawer Back 12.
5. Use Screws (E) to secure each runner, ensuring the wheel mechanism faces outward and the track aligns properly with the front.

1. Position the Middle Panel (6) horizontally.
2. Align the drawer sides (7–10) and drawer backs (11–12) vertically as shown in the diagram.
3. Insert Cam Dowels (A2) into the pre-drilled holes on the ends of all side and back panels.
4. Attach the sides and backs to the Middle Panel, ensuring all dowels go into the correct holes.
5. Secure each connection using Cam Lock Nuts (A1) and rotate to lock the panels in place.
6. Cover the cam locks with Cam Covers (A3) for a clean finish.

1. Align the Left Side Panel (4) and Right Side Panel (5) with the drawer frame composed of panels 6 to 12.
2. Make sure the drawer rail support blocks (11 & 12) and drawer dividers (7 to 10) are all positioned correctly.
3. Insert the Cam Dowels (A2) from the side panel ends into the respective holes in the structure.
4. Secure each connection using Cam Lock Nuts (A1) and tighten by turning clockwise.
5. Apply Cam Covers (A3) to conceal the lock nuts for a clean finish.

1. Position the Rear Left Post (23) and Rear Right Post (24) vertically aligned with the ends of the Side Panels (4 & 5).
2. Align the Footboard Panel (2) across the posts and panels.
3. Insert the Cam Dowels (A2) into the pre-drilled holes on each side of the side and middle structures.
4. Secure the connection using Cam Lock Nuts (A1) and turn to lock.
5. Conceal each cam lock with Cam Covers (A3) for a neat finish.

1. Align the Headboard Panel (1) with the Rear Left (23) and Rear Right (24) Posts.
2. Attach the Bottom Part of the Headboard (22) horizontally between the side posts.
3. Insert Long Bolts (I) through the side panels and drawer supports into the posts. Tighten the bolts with washers and nuts.
4. Secure the Metal Support Pins (H) using Phillips Head Screws (D) into the drawer dividers.
5. Use Brackets (G) and Phillips Head Screws (D) to reinforce the center of the frame between the posts.

1. Lay out the Bed Slats (15) evenly across the bed frame, aligning them with the pre-installed side supports.
2. Insert a Single Plastic Cap (J) on each end of every slat and push them into the designated slots on the bed frame.
3. For the center alignment, use Double Plastic Caps (K) to secure pairs of slats in the middle rail, ensuring they are held firmly in place

1. With the bed frame fully assembled, place the Bed Slats (15) across the width of the frame.
2. Ensure each slat is securely clipped into place using the Single Plastic Caps (J) on both ends.
3. In the middle of the bed, fasten each slat pair into the center support using Double Plastic Caps (K) to maintain alignment and structural support.

1. Position the Drawer Front Panel (17) horizontally in front of you.
2. Attach two Drawer Sides (18) on either end of the front panel using the pre-drilled holes.
3. Secure them using Screws (F) and a screwdriver.
4. Finally, attach the Drawer Back Panel (19) to the ends of the side panels, also using Screws (F).

Repeat this process to assemble all 4 drawer frames.

1. Take the Drawer Bottom Panel (20) and align it with the grooves on the inside of the assembled drawer frame.
2. Carefully slide the panel along the grooves, ensuring it fits snugly between the Drawer Sides (18) and sits flush with the Drawer Front (17) and Back (19).

Repeat the process for all four drawers.

1. Take one Drawer Rail Support (21) and align it over the Drawer Bottom Panel (20) between the Drawer Sides (18) and Drawer Front (17).
2. Insert the Cam Dowels (A2) through the support and into the side panels.
3. Secure the dowels using the Cam Lock Nuts (A1) and rotate to lock in place.
4. Cover the exposed cam locks with Cover Caps (A3) for a clean finish.

Repeat for all four drawers.

1. Take one Drawer Front Panel (16) and align it with the edges of the drawer assembly, ensuring the Cam Dowels (A2) on the Drawer Sides (18, 19) insert properly into the designated holes on the back of the front panel.
2. Secure the connection using Cam Lock Nuts (A1) from inside the drawer. Turn clockwise until locked.
3. Once secured, place the Cover Caps (A3) over the cam locks.

Repeat this process for all four drawers.

1. Take one drawer assembly and place it with the front (Part 16) facing you.
2. Identify the left (L2-L) and right (L2-R) metal runners.
3. Align the L2-L runner with the pre-drilled holes on the Drawer Left Side (18) and secure it using 3 Screws (E).
4. Repeat the same for the L2-R runner on the Drawer Right Side (19).
5. Make sure all screws are firmly fastened and the runner slides are aligned correctly.

Repeat this process for all four drawers.

1. Take one of the fully assembled drawers and align its metal runners with the rails inside the bed frame.
2. Gently slide the drawer into the frame until it locks in place.

Repeat this process for all four drawers, ensuring each one glides smoothly in and out.

• Verify that all slats are securely fastened and evenly spaced.
• Check for any loose connections and tighten the screws if necessary