www.time4sleep.co.uk
Instructions by Time4sleep Fontainebleau Oak Bed Frame
Time4sleep
time4sleep

Instructions by

time4sleep

Fontainebleau Oak Bed Frame

Assembly instructions for Fontainebleau Oak Bed Frame by Time4Sleep

Product Information

Fontainebleau Oak Bed Frame

Introduce timeless elegance to your bedroom with the Fontainebleau Standard Bedstead, a beautifully crafted frame designed to bring style, stability, and comfort to your sleeping space. Available in Double and King, this bedstead features a clean, classic silhouette that complements both contemporary and traditional interiors.

View product
SKU
Font46oak,Font50oak,Font60oak

Tools

Materials

Headboard
1 Piece(s)
Footboard
1 Piece(s)
Side Rail - LH
1 Piece(s)
Side Rail - RH
1 Piece(s)
Centre Support Rail
1 Piece(s)
Bentwood Slats (28 for Double, 30 for King)
28 Piece(s)
Leg for Support Rail
2 Piece(s)

  1. 1. Insert the Threaded Studs into the Headboard and Footboard

    1. Lay the Headboard (1) and Footboard (2) upright.
    2. Insert a Threaded Stud (F) into each pre-drilled hole on the inner faces of both panels.
    3. Rotate each stud clockwise until fully tightened by hand.
    4. Verify that all studs sit straight and securely in place.

  2. 2. Prepare and Secure the Side Rails to the Footboard

    1. Insert a Wooden Dowel (I) into the small pre-drilled hole at the end of each side rail (Left 3, Right 4).
    2. Align the side rails with the Threaded Studs (F) on the Footboard (2) and slide the rails fully onto the studs.
    3. Fit a Half Moon Bracket (H) onto each stud inside the rail, followed by Washer B, Washer C, and a Nut (G).
    4. Tighten each nut using the Spanner (K) until the connection is secure.
    5. Verify that both side rails are firmly locked and sit flush against the footboard.

  3. 3. Attach the Side Rails to the Headboard

    1. Insert a Wooden Dowel (I) into the small pre-drilled hole at the front end of each side rail.
    2. Align the Left Side Rail (3) and Right Side Rail (4) with the Threaded Studs (F) on the Headboard (1). Slide each side rail fully onto the studs.
    3. Place a Half Moon Bracket (H) onto each stud inside the rail, followed by Washer B, Washer C, and a Nut (G).
    4. Tighten the nut using the Spanner (K) until the connection is secure.
    5. Verify that both rails sit flush against the headboard and the full bed frame is now stable and aligned.

  4. 4. Attach the Support Legs to the Centre Support Rail

    1. Position the Centre Support Rail (5) with the pre-drilled holes facing upward.
    2. Align a Support Leg (7) under the centre rail so the top hole matches the hole in the rail.
    3. Insert Bolt E through Washer A and Washer C, then tighten the bolt into the leg.
    4. Repeat the process for the second support leg.
    5. Verify that both legs are firmly attached and stand straight.

  5. 5. Fix the Centre Support Rail to the Bed Frame

    1. Position the Centre Support Rail (5) between the two side rails.
    2. Align the end plates of the centre rail with the pre-drilled holes on each side rail.
    3. Insert Bolt D through Washer A and Washer C, then fasten the centre rail to each side rail.
    4. Ensure the full bed frame is properly squared, as shown in the diagram. Once aligned, tighten all bolts on the bed frame 100%.

  6. 6. Fit the Slats onto the Side Rails and Centre Support Rail

    1. Insert a Slat End Cap (L) onto each end of every Bentwood Slat (6).
    2. For each pair of slats that meet at the centre rail, attach a Slat Centre Cap (M) to join them.
    3. Press each slat down firmly so the end caps lock into the slots on the side rails.
    4. Continue fitting all slats across the frame until the full sleeping surface is covered.
    5. Verify that all slats sit evenly and securely in both the side rails and the centre rail.

  7. 7. Final Check

    • Verify that all slats are securely fastened and evenly spaced.
    • Check for any loose connections and tighten the screws if necessary
Previous stepCopy link to sharePrint / PDFNext step