Brookes 3 Drawer Wooden Bedside

Assembly instructions for Brookes 3 Drawer Wooden Bedside by Time4Sleep.

Product Information

Brookes 3 Drawer Wooden Bedside

Add a rustic feel to your bedroom with our Brookes dark oak 3 drawer bedside table. Perfectly matched with our Brookes Ottoman and static bed frame, this furniture range has been designed with a keen eye for style. The sturdy solid frame hosts plenty of room to store your valuables right next to your bed, and the dark oak adds an industrial feel to compliment a bold interior design.

View product

SKU: Brookes3drwBedside

Dimensions

Width	45 cm
Length	40 cm
Height	59 cm

Tools

Parts Identification

Top panel: 1
Side panel: 2
Base panel: 1
Front rail: 2
Back rail: 2
Drawer front: 3
Drawer LH side panel: 3
Drawer RH side panel: 3
Drawer back panel: 3
Drawer base: 3
Cabinet back panel: 1

1. Back rail and side panels
Insert dowels (Dx3) into the designated holes on the back rail (5).

Insert dowels (Dx4) into the designated holes on the side panels (2).

Secure the rails to the side panels using screws (Ax4).
2. Base panel
Insert two dowels (D) into each of the two rails (part 4).

Position the base panel (part 3) on a flat surface.

Align the rails (part 4) with the designated holes on the base panel.

Secure each rail to the base panel using six screws (A).
3. Front and back rails
Insert dowels into the designated holes on the side panels.

Secure the front rails (2) to the side panel using screws.

Insert dowels into the front and back rails (4 and 5).

Secure them using the provided connectors and screws.
4. Attach the other side panel
Insert dowels into the designated holes on the other side panel.

Align the dawer LH side panel with the RH side panel.

Secure then using screws and large cam locks.
5. Assemble the Main Structure
Insert dowels into the designated holes on the base and side panels as instructed.

Use connectors and screws to secure the panels together. Refer to the diagram for the correct placement of large and small cam locks (Bx4 and Bx6).

Tighten all screws and connectors to maintain the stability of the structure.
6. Cabinet back panel

Insert the back panel in the rails.
7. Prepare the top panel

Prepare the top panel by inserting six screws (Ax6) into the designated holes as shown in the diagram.
8. Attach top Panel
Align the side panels with the base and top panel.

Use connectors and screws to attach the panels securely.

Slide the top panel into the grooves on the rails.

Use screws to fasten it securely, ensuring all connections are tight for stability.
9. Drawers Side Panels
Insert screws labeled Ax4 into the designated holes on the drawer front (6).

Align the drawer side panels (LH and RH) with the back panel (9).

Secure the side panels to the back panel using screws labeled Hx4 and Ex2
10. Drawers base and front
Slide the base of the drawers (10) into the grooves of the side panels.

Align the front panel (6) with the side panels.

Use two cam bolts (Ex2) to secure the top panel to the side panels.

Insert four screws (Cx4) into the pre-drilled holes to further secure the top panel.
11. Drawer handles
Align the handle (J) with the pre-drilled holes on the front panel of the drawer.

Insert two screws (K) through the holes from the inside of the drawer front.

Tighten the screws to securely attach the handle to the drawer front.
12. Secure back panel
Secure the back panel using screws (F) and brackets (G) as shown in the diagram.

Ensure that all four screws are tightly fastened to keep the back panel securely in place.
13. Add and remove drawers

To remove a drawer, press left & right levers down at the same time and slide the whole drawer out of the outer runners