Vented Garage Flooring Tiles

40720-40740

Product Information

Vented Garage Flooring Tiles

View product

SKU: 40720-40740

GPSR Information

Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG
Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England, +441347878880

Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands +441347878880
Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands, +44134787888

Safety Advice

Ensure the garage floor is clean, level, and free of debris, oil, or chemicals before installation. Uneven surfaces may lead to instability or damage.
Follow the provided instructions to connect the tiles, edges, and corners securely. Incorrect assembly can cause shifting or unsafe conditions.
Install in areas with moderate temperature conditions. Prolonged exposure to heat above 140°F (60°C) can cause warping or cracks.
Avoid installing near direct heat sources (heaters, furnaces, etc.) to prevent material degradation.
Each tile supports a maximum static load of 3,306 pounds (1500 kg). Exceeding this limit may lead to cracks or permanent deformation. Distribute heavy loads evenly.
Avoid parking vehicles with excessively hot tires on the tiles, as this may soften the plastic and cause deformation over time.
Do not use the tiles to support jacks, ramps, or machinery that exceeds the stated weight limit or exerts uneven pressure. Always use protective mats if needed.
Keep the tiles away from open flames, welding equipment, or any heat sources that may cause melting or fires.
Do not run electrical wires beneath the tiles. Exposed wiring can create electrical hazards, including shock or fire risks.
Clean with mild detergent and water. Avoid harsh chemicals or abrasive cleaners that can damage the surface.
Periodically check the tiles for cracks, wear, or damage. Replace damaged tiles immediately. Ensure interlocks remain secure after exposure to heavy loads or extreme temperatures.
Ensure proper drainage and ventilation to prevent water accumulation under the tiles, which can lead to mold or mildew. Dry the area fully before reinstallation if moisture is detected.
This product is designed for garages and similar environments. Avoid using it in areas with constant foot traffic or outdoor settings, where the surface may become slippery when wet.
Avoid dragging heavy or sharp objects across the tiles, as this can lead to scratches, cracks, or damage to the interlocking system.

1. Step 1
Buckled refers to a side with buckles prominent.

Unbuckled refers to a side without buckles.

To connect the sides place the buckled side underneath the edge of the unbuckled side before firmly pressing down linking the different pieces.

Clip the edges and corner together by attaching the buckled and unbuckled sides together.

Clip the attached edges and corner to the Vented Garage Floor Tile by aligning the corresponding buckled and unbuckled sides together to join the pieces.
2. Step 2
To connect the sides place the buckled side underneath the edge of the unbuckled side before firmly pressing down linking the different pieces.

Clip the Vented Garage Floor Tiles together by aligning the buckled and unbuckled sides together to join the pieces.

Repeat this process until you achieved your desired size and design.
3. Maintenance
Regular Cleaning: Sweep or vacuum debris and dirt to keep the surface clean.

Deep Cleaning: Use a mild detergent with water and a mop or soft brush. Rinse thoroughly with water and let air dry.

Spot Cleaning: For stubborn stains, use a non-abrasive cleaner and a soft scrub brush.

Avoid Harsh Chemicals: Do not use solvents or bleach, as they may damage the tiles.

Inspect Periodically: Check for any loose or damaged tiles and replace as needed to maintain - stability and appearance.
4. Troubleshooting
WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?

If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.

FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.

monstershop.co.uk
Instructions by Monstershop Vented Garage Flooring Tiles
Monstershop / Vented Garage Flooring Tiles Instructions by monstershop Vented Garage Flooring Tiles 40720-40740 Product Information Vented Garage Flooring Tiles View product SKU 40720-40740 GPSR Information UK Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England, +441347878880 EU Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands +441347878880 Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands, +44134787888 Unit Overview Transform your garage with our Vented Garage Flooring Tiles, designed to provide durability, style, and practicality. Sold as a complete set for single or double garages, this flooring solution includes edges and corners for a seamless, finished look. The vented design ensures excellent airflow and drainage, keeping your space clean and dry. Ideal for transforming your garage into a professional workspace, showroom, or organised storage area. Specifications Tile dimensions: 400mm x 400mm x 18mm Tile weight: 480g Edge dimensions: 400mm x 65mm x 18mm Edge weight: 100g Corner dimensions: 65mm x 65mm x 18mm Corner weight: 12g Weight Capacity: 6-8 tonnes. Tiles available in: Black, Grey and Blue. Material: Polypropylene Suitable for both indoor and outdoor use. Safety Advice Ensure the garage floor is clean, level, and free of debris, oil, or chemicals before installation. Uneven surfaces may lead to instability or damage. Follow the provided instructions to connect the tiles, edges, and corners securely. Incorrect assembly can cause shifting or unsafe conditions. Install in areas with moderate temperature conditions. Prolonged exposure to heat above 140°F (60°C) can cause warping or cracks. Avoid installing near direct heat sources (heaters, furnaces, etc.) to prevent material degradation. Each tile supports a maximum static load of 3,306 pounds (1500 kg). Exceeding this limit may lead to cracks or permanent deformation. Distribute heavy loads evenly. Avoid parking vehicles with excessively hot tires on the tiles, as this may soften the plastic and cause deformation over time. Do not use the tiles to support jacks, ramps, or machinery that exceeds the stated weight limit or exerts uneven pressure. Always use protective mats if needed. Keep the tiles away from open flames, welding equipment, or any heat sources that may cause melting or fires. Do not run electrical wires beneath the tiles. Exposed wiring can create electrical hazards, including shock or fire risks. Clean with mild detergent and water. Avoid harsh chemicals or abrasive cleaners that can damage the surface. Periodically check the tiles for cracks, wear, or damage. Replace damaged tiles immediately. Ensure interlocks remain secure after exposure to heavy loads or extreme temperatures. Ensure proper drainage and ventilation to prevent water accumulation under the tiles, which can lead to mold or mildew. Dry the area fully before reinstallation if moisture is detected. This product is designed for garages and similar environments. Avoid using it in areas with constant foot traffic or outdoor settings, where the surface may become slippery when wet. Avoid dragging heavy or sharp objects across the tiles, as this can lead to scratches, cracks, or damage to the interlocking system. 1. Step 1 Buckled refers to a side with buckles prominent. Unbuckled refers to a side without buckles. To connect the sides place the buckled side underneath the edge of the unbuckled side before firmly pressing down linking the different pieces. Clip the edges and corner together by attaching the buckled and unbuckled sides together. Clip the attached edges and corner to the Vented Garage Floor Tile by aligning the corresponding buckled and unbuckled sides together to join the pieces. 2. Step 2 To connect the sides place the buckled side underneath the edge of the unbuckled side before firmly pressing down linking the different pieces. Clip the Vented Garage Floor Tiles together by aligning the buckled and unbuckled sides together to join the pieces. Repeat this process until you achieved your desired size and design. 3. Maintenance Regular Cleaning: Sweep or vacuum debris and dirt to keep the surface clean. Deep Cleaning: Use a mild detergent with water and a mop or soft brush. Rinse thoroughly with water and let air dry. Spot Cleaning: For stubborn stains, use a non-abrasive cleaner and a soft scrub brush. Avoid Harsh Chemicals: Do not use solvents or bleach, as they may damage the tiles. Inspect Periodically: Check for any loose or damaged tiles and replace as needed to maintain - stability and appearance. 4. Troubleshooting WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER? If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt. FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM. Monstershop website Terms Privacy

Product Information

Vented Garage Flooring Tiles

1. Step 1

2. Step 2

3. Maintenance

4. Troubleshooting