14x Hexagon LED Lighting with Borders

Transform your space with our innovative hexagon led lighting, the perfect solution for garages, gyms, workshops and more.

Product Information

Hexagon LED Lighting x 14

These 14 honeycomb-shaped LED lights and border not only create a stunning visual effect but also deliver bright, pure white illumination that enhances any environment. With a colour temperature of 6000K and 1700 lumens per panel, our hexagon lighting provides optimal brightness, making it perfect for detailed tasks in workshops or creating a welcoming atmosphere in salons.

SKU: 213507

Colour	White
Weight	8.3kg
Material	PVC
Length	486cm / 4.86m / 191.3”
Width	244cm / 2.44m / 96.1”
Depth	3.5cm / 0.035m / 1.4”
Power	17W
Voltage	100-230V AC
Lumen	1700
Colour Temperature	6000K
Light Working Temperature	20-50°C
Environmental Working Temperature	-20-45°C
Working Lifetime	20,000 Hours
Mounting Options	Screw, Grid or Suspended
CRI (Ra):	90
Colour Consistency (SDCM)	<8

GPSR Information

Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG
Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England, +441347878880

Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands +441347878880
Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands, +44134787888

Safety Advice

WARNING!

This product is Class I equipment and requires a proper grounding connection to ensure safety. It must be installed in accordance with local electrical codes that may dictate specific grounding procedures. Failure to ground this product correctly could increase the risk of electric shock.

Ensure you have read and fully understood the instruction manual and safety advice before using this product.
Indoor use only. Do not use this product in outdoor or damp environments, including bathrooms or other areas with high humidity.
To avoid creating a trip hazard and potential damage to the wiring during installation, ensure the cables are not overstretched, twisted, or positioned in high-traffic areas where they can be damaged.
Ensure the power supply is disconnected at the mains while installing, cleaning, or performing any maintenance on the product.
Ensure there is adequate ventilation around the light fixture to prevent overheating. Do not cover the light fixture with any material, including cloth, paper, or other obstructions, as this can block airflow and increase the risk of fire.
LED lights emit minimal heat but can still pose a fire risk if placed in contact with flammable materials. Keep the light fixture away from curtains, paper, aerosols, or other flammable items.
Do not hang any items or apply external weight or pressure to the light fixture as this may compromise its structural integrity.
Inspect the product regularly for any visible damage, including cracks in the light fixture or exposed wiring. Do not use the product if any damage is identified, and contact a qualified professional for repairs.
Dispose of the product, including its electronic and LED components, responsibly and in accordance with local regulations. Do not dispose of with household waste.
Keep the product and its components out of reach of children and pets. Ensure that children, vulnerable persons, and pets are supervised when they are in the vicinity of the light fixture.
Before installation, ensure the mounting surface (e.g., ceiling or wall) can support the weight of the light fixture. If unsure, consult a qualified professional to assess the surface and recommend suitable fixtures and fittings.
Use only the fixtures and fittings supplied with the product or those recommended by the manufacturer. Ensure all screws and mounting components are securely fastened to prevent the fixture from detaching.
Do not connect this product to an overloaded electrical circuit as it may result in a risk of fire or electric shock. Ensure that the electrical supply matches the voltage and wattage requirements specified for this LED product.
All electrical connections must be performed by a qualified electrician to ensure safe and compliant installation. Do not attempt to wire the product into the mains unless you are licensed and trained to do so.
Handle all components, including the light fixture and mounting hardware, with care during installation to avoid damage.

Materials

1.

Begin by planning the entire lighting structure on the floor prior to mounting. We recommend laying it out before connecting it. The border should be constructed first, by joining the 1175mm LED tubes using the 180° straight and 90° corner two-way connectors. Install a T connector at the corner of the border designated for a power cable connection to the power supply. Ensure the tubes are fully inserted into the connectors for a secure fit.
2.

Now, start forming each hexagonal shape by connecting the 440mm LED tubes with 120° and 360° Y two-way connectors according to the pattern you desire. Ensure a 360° Y two-way connector in installed on the corner of one hexagon to allow for the second power cable connection.
3. Ceiling Installation

Raise and install to the ceiling either as a single unit or in separate sections. Use the appropriate wall plugs and screws to fix it to the ceiling, inserting them through the holes in the connectors.
4. Grid Installation

Secure the lighting structure evenly to the grids by threading the provided cable ties through the connector holes and fastening them tightly around the grid mesh.
5. Ceiling Suspension Kit Installation
Make sure the ceiling suspension kit is attached uniformly across the LED light assembly to achieve an even distribution of weight.

Begin by laying out one suspension kit in the desired area for installation. Follow the diagrams below for each kit.
6. Maintenance
Clean the light fixture with a dry or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners as they may damage the finish.
7. Troubleshooting
WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?

If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.

FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.

Product Information

Hexagon LED Lighting x 14

GPSR Information

Materials

1.

2.

3. Ceiling Installation

4. Grid Installation

5. Ceiling Suspension Kit Installation

6. Maintenance

7. Troubleshooting