Instructions by

ecofort

ecoQ DryAir 12L Essential

Step-by-step guide for setting up, using, and maintaining your ecoQ DryAir 12L Essential dehumidifier. Covers placement, modes, timer, drainage, cleaning, and safety tips to ensure optimal performance and long-term use.

Product Information

ecoQ DryAir 12L Essential

The ecoQ DryAir 12L Essential was deliberately pared down to the essentials to make the dehumidifier as affordable and easy to use as possible. With its intuitive controls, it's incredibly easy to operate and offers all the necessary features expected from a high-quality dehumidifier. It also impresses with its compact size and simple design. It is suitable for dehumidifying rooms up to 30 m².

View product

SKU: A022890

Safety instructions

Before use:

Please read and follow the following safety instructions carefully before starting operation and keep this manual in a safe place.

The appliance must stand upright for at least 12 hours before it is used for the first time or after it has been transported.
Only use this appliance as described in these instructions. Any other use is not recommended and may result in personal injury and damage to property.
Check the mains cable, plug and the appliance for cracks and damage.
Do not operate the appliance if it is damaged.
If the appliance is damaged, do not repair it yourself, but contact the customer service department of the retailer from whom the appliance was purchased.
Do not allow children to play with parts of the packaging.

During use:

Only use original accessories and spare parts.
Place the appliance on a stable, level and dry surface.
Clean the air filter regularly according to the instructions in the operating instructions.
Do not allow the cable, the plug and the electrical and electronic parts of the appliance to come into contact with water or other liquids.
Do not cover the air inlets and outlets of the appliance and keep them free of obstacles.
Do not use the device in potentially explosive atmospheres.
Supervise children, persons with reduced physical, sensory or mental capabilities and pets when the appliance is in operation.
Empty the water tank regularly when it is full.

After use:

Switch off the appliance and unplug it from the mains if you are not going to use it for a long time.
Clean the appliance according to the instructions in the operating instructions.
Store the device in a dry, sun-protected and safe place.

Materials

Control Panel
Digital Display
Air Humidity Light
Front Casing
Caster
Recess for Water Tank Removal
Humidity Sensor
Handle
Air Inlet with Filter
Water Tank
Continuous Drainage
Power Cord
Dry Air Outlet

Control Panel Description

1. Control Panel
2. Operation
Lock

Fan Speed

Timer

Humidity Setting

Mode

On/Off
3. Display
Auto Mode

Timer

Lock

Tank Full

Continuous Mode

Sleep Mode

Power / Stand-by

Low Fan Speed

High Fan Speed
Operating Instructions
4. On / Off
Press this button to turn the dehumidifier on.

By default, the device will start operation in Hygrostat-Mode with a humidity setting of 60% RH in High Fan Speed.

Press a second time to turn the unit off.

The red power indicator will be lit on the display to indicate stand-by mode.
5. Mode
Press to cycle between the three available modes:

Hygrostat

Continuous Drying

Sleep

The corresponding indicator will be lit on the display:

Hygrostat (1)

When the ambient relative humidity exceeds the one set by 3%, the fan will start and the compressor a few seconds later to start the dehumidifying process.

When the ambient relative humidity falls below the one set by 3%, the compressor will stop operating and a few seconds later the fan will also stop.

Note: Both Fan Speed and Humidity can be adjusted in Hygrostat-Mode.

Continuous Drying (2)

The device dehumidifies permanently in High Fan Speed, regardless of the ambient relative humidity.

Note: No target humidity or speed intensity can be set.

Sleep (3)

When Sleep mode is activated, the display switches off after a few seconds (only the Sleep mode symbol remains dimly lit) and the Fan Speed will automatically drop to Low.

Press any button to light up display, without any further action, the display switches off again after a few seconds. Press Mode Button to exit Sleep Mode.

Note: In Sleep Mode the target humidity is adjustable but Fan Speed cannot be set to High.
6. Humidity Setting

In Hygrostat and Sleep modes the target humidity can be set as to when the device automatically stops dehumidifying as soon as the desired target humidity is reached.

The target humidity can be set in 5% increments: 30-35-40-45-50-55-60-65-70-75-80%

Press and hold this button to display the ambient temperature. After a few seconds, the display jumps back to the ambient relative humidity.
7. Fan Speed

Press to switch between Low and High Fan Speed. The corresponding indicator will be shown on the display.
8. Timer

The timer function can be used as a switch-on or switch-off timer. If the device is in Off status, set the interval after how many hours the device should switch on. If the device is in On status, set the interval after how many hours the device should switch off.

With each press of this button, the value is increased by one hour from 00 to 24 hours. With the setting 00, the Timer function is cancelled. The Timer function can also be cancelled by turning the device Off and then On again.

When the timer is active, the corresponding indicator is displayed.
9. Lock

To prevent the misuse, the unit is equipped with a Lock function, which will make all buttons on the unit non-functional. Press this button for 3 seconds to activate or deactivate the lock function.

Note: After activating the lock function, the lock indicator will be displayed on screen.
10. 3 Color Air Humidity Light
The three-color light bar shows the current relative humidity:

Relative humidity <45%: Blue

45≤ relative humidity ≤65%: Green

Relative humidity >65%: Red
11. Automatic Shut Off

When the water tank becomes full during normal use, the unit shuts off automatically with tank full indicator displaying and the buzzer alarm sounds 5 times.

Note: If the water tank is removed or not placed correctly, the behavior described above will also occur.
12. Automatic Defrost Feature

The unit is equipped with an automatic defrost feature. When ice builds up on the vaporizer, the compressor shuts off and the unit runs on high fan speed until the frost has disappeared. This feature is not manually adjustable by the user.
13. Memory Feature

In case of a power failure, the unit will continue operating in the mode set prior to the shutdown, as soon as power is recovered. Meaning the fan speed setting, humidity setting and working mode setting will be obtained.
Continuous Drainage

14. Continuous Drainage Function

With the continuous drainage option, all condensation can be drained directly.

This eliminates the need to empty the water tank and the unit can operate completely autonomously
15. Attach the Drain Hose

Connect a suitable drain hose (12 mm inner diameter) with the drainage outlet.

Ensure that the hose is securely and tightly fitted to prevent leakage.
16. Position the Hose Correctly

Make sure that the drain hose is routed downwards from the device so that the dripping condensation water can drain down a slope.
17. Check for Blockages

Always make sure the drainage hose is not blocked or obstructed to maintain a smooth flow.
Cleaning and Maintenance
18. Cleaning the Dehumidifier
To ensure the effectiveness of the dehumidifier, it is recommended to clean the unit at least every two weeks.

Turn the dehumidifier off and disconnect the power plug before cleaning.

Use a soft cloth to gently wipe the outer case to remove dust.

Vacuum clean the air inlet and outlet grilles of the dehumidifier.

Remove the water tank and wash it by hand using a mild detergent.

Rinse the water tank with clean water.

Note: Do not spray water directly onto the unit.
19. Cleaning the Air Filter
To ensure the effectiveness of the dehumidifier, it is recommended to clean the filter at least every two weeks.

Remove the water tank.

Pull the filter downwards and remove it from the unit.

Wash the filter carefully in warm water, use a mild detergent if necessary.

Note: Do not wash the filter frame in a dishwasher.
20. Reinstall the Filter
Allow the filter to dry completely.

Push the filter back upwards into the unit.

Place the water tank back in place.

Note: DO NOT use the dehumidifier without the air filter frame in place.
Troubleshooting
21. The dehumidifier does not work
The mains lead is not properly plugged in or there is no power from the wall socket.

The water tank is full or incorrectly fitted.

The set humidity level has been reached.

Power plug or cord damaged.
22. The humidity is not decreasing
The dehumidifier has not been used long enough.

Make sure that the doors and windows are closed.

The ambient temperature is too low.

The ambient humidity level is lower than the humidity set.

The air filter frame is overly dirty.

Exceeded recommended room capacity.
23. Unusual noises
The dehumidifier is tilted or standing on an uneven surface.

Make sure that the air filter is clean.

Loose or foreign particles inside the unit.
24. Buttons don’t work
Lock is activated. Long-press the lock button until the lock indicator disappears from the display.
25. Water in tank overflows
Water tank may be damaged.

Float for water auto-sensor is not in place.

Internal drainage passage is blocked or obstructed.
26. Error code
CL: Low environmental temperature (below 5 °C)

CH: High environmental temperature (above 38 °C)

LO: Low environmental humidity (below 20%)

HI: High environmental humidity (above 90%)

E1 / E2: Humidity sensor error. Contact customer care.

ecofort.ch
Instructions by Ecofort ecoQ DryAir 12L Essential
Ecofort / ecoQ DryAir 12L Essential Instructions by ecofort ecoQ DryAir 12L Essential Step-by-step guide for setting up, using, and maintaining your ecoQ DryAir 12L Essential dehumidifier. Covers placement, modes, timer, drainage, cleaning, and safety tips to ensure optimal performance and long-term use. Product Information ecoQ DryAir 12L Essential The ecoQ DryAir 12L Essential was deliberately pared down to the essentials to make the dehumidifier as affordable and easy to use as possible. With its intuitive controls, it's incredibly easy to operate and offers all the necessary features expected from a high-quality dehumidifier. It also impresses with its compact size and simple design. It is suitable for dehumidifying rooms up to 30 m². View product SKU A022890 Safety instructions Before use: Please read and follow the following safety instructions carefully before starting operation and keep this manual in a safe place. The appliance must stand upright for at least 12 hours before it is used for the first time or after it has been transported. Only use this appliance as described in these instructions. Any other use is not recommended and may result in personal injury and damage to property. Check the mains cable, plug and the appliance for cracks and damage. Do not operate the appliance if it is damaged. If the appliance is damaged, do not repair it yourself, but contact the customer service department of the retailer from whom the appliance was purchased. Do not allow children to play with parts of the packaging. During use: Only use original accessories and spare parts. Place the appliance on a stable, level and dry surface. Clean the air filter regularly according to the instructions in the operating instructions. Do not allow the cable, the plug and the electrical and electronic parts of the appliance to come into contact with water or other liquids. Do not cover the air inlets and outlets of the appliance and keep them free of obstacles. Do not use the device in potentially explosive atmospheres. Supervise children, persons with reduced physical, sensory or mental capabilities and pets when the appliance is in operation. Empty the water tank regularly when it is full. After use: Switch off the appliance and unplug it from the mains if you are not going to use it for a long time. Clean the appliance according to the instructions in the operating instructions. Store the device in a dry, sun-protected and safe place. Warning about Refrigerant R290 Important notes: This appliance uses R290 (propane gas) as a refrigerant. R290 is flammable, but heavier than air. In the event of a leak, the gas collects on the floor. R290 is odourless. Dangers: Open flames, cigarettes or sparks can ignite the gas. The gas can accumulate in higher areas. Safety instructions: Operate the appliance in a room of at least 4 m². Avoid flames, cigarettes and sparks near the appliance. Set up the appliance in a well-ventilated room. Responsible Disposal This symbol indicates that this product should not be disposed of with general household waste. This applies throughout the entire EU. In order to prevent any harm to the environment or health hazards caused by incorrect waste disposal, the product must be handed in for recycling so that the material can be disposed of in a responsible manner. When recycling your product, take it to your local collection facility or contact the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner. Materials Control Panel Digital Display Air Humidity Light Front Casing Caster Recess for Water Tank Removal Humidity Sensor Handle Air Inlet with Filter Water Tank Continuous Drainage Power Cord Dry Air Outlet Control Panel Description 1. Control Panel 2. Operation Lock Fan Speed Timer Humidity Setting Mode On/Off 3. Display Auto Mode Timer Lock Tank Full Continuous Mode Sleep Mode Power / Stand-by Low Fan Speed High Fan Speed Operating Instructions 4. On / Off Press this button to turn the dehumidifier on. By default, the device will start operation in Hygrostat-Mode with a humidity setting of 60% RH in High Fan Speed. Press a second time to turn the unit off. The red power indicator will be lit on the display to indicate stand-by mode. 5. Mode Press to cycle between the three available modes: Hygrostat Continuous Drying Sleep The corresponding indicator will be lit on the display: Hygrostat (1) When the ambient relative humidity exceeds the one set by 3%, the fan will start and the compressor a few seconds later to start the dehumidifying process. When the ambient relative humidity falls below the one set by 3%, the compressor will stop operating and a few seconds later the fan will also stop. Note: Both Fan Speed and Humidity can be adjusted in Hygrostat-Mode. Continuous Drying (2) The device dehumidifies permanently in High Fan Speed, regardless of the ambient relative humidity. Note: No target humidity or speed intensity can be set. Sleep (3) When Sleep mode is activated, the display switches off after a few seconds (only the Sleep mode symbol remains dimly lit) and the Fan Speed will automatically drop to Low. Press any button to light up display, without any further action, the display switches off again after a few seconds. Press Mode Button to exit Sleep Mode. Note: In Sleep Mode the target humidity is adjustable but Fan Speed cannot be set to High. 6. Humidity Setting In Hygrostat and Sleep modes the target humidity can be set as to when the device automatically stops dehumidifying as soon as the desired target humidity is reached. The target humidity can be set in 5% increments: 30-35-40-45-50-55-60-65-70-75-80% Press and hold this button to display the ambient temperature. After a few seconds, the display jumps back to the ambient relative humidity. 7. Fan Speed Press to switch between Low and High Fan Speed. The corresponding indicator will be shown on the display. 8. Timer The timer function can be used as a switch-on or switch-off timer. If the device is in Off status, set the interval after how many hours the device should switch on. If the device is in On status, set the interval after how many hours the device should switch off. With each press of this button, the value is increased by one hour from 00 to 24 hours. With the setting 00, the Timer function is cancelled. The Timer function can also be cancelled by turning the device Off and then On again. When the timer is active, the corresponding indicator is displayed. 9. Lock To prevent the misuse, the unit is equipped with a Lock function, which will make all buttons on the unit non-functional. Press this button for 3 seconds to activate or deactivate the lock function. Note: After activating the lock function, the lock indicator will be displayed on screen. 10. 3 Color Air Humidity Light The three-color light bar shows the current relative humidity: Relative humidity <45%: Blue 45≤ relative humidity ≤65%: Green Relative humidity >65%: Red 11. Automatic Shut Off When the water tank becomes full during normal use, the unit shuts off automatically with tank full indicator displaying and the buzzer alarm sounds 5 times. Note: If the water tank is removed or not placed correctly, the behavior described above will also occur. 12. Automatic Defrost Feature The unit is equipped with an automatic defrost feature. When ice builds up on the vaporizer, the compressor shuts off and the unit runs on high fan speed until the frost has disappeared. This feature is not manually adjustable by the user. 13. Memory Feature In case of a power failure, the unit will continue operating in the mode set prior to the shutdown, as soon as power is recovered. Meaning the fan speed setting, humidity setting and working mode setting will be obtained. Continuous Drainage 14. Continuous Drainage Function With the continuous drainage option, all condensation can be drained directly. This eliminates the need to empty the water tank and the unit can operate completely autonomously 15. Attach the Drain Hose Connect a suitable drain hose (12 mm inner diameter) with the drainage outlet. Ensure that the hose is securely and tightly fitted to prevent leakage. 16. Position the Hose Correctly Make sure that the drain hose is routed downwards from the device so that the dripping condensation water can drain down a slope. 17. Check for Blockages Always make sure the drainage hose is not blocked or obstructed to maintain a smooth flow. Cleaning and Maintenance 18. Cleaning the Dehumidifier To ensure the effectiveness of the dehumidifier, it is recommended to clean the unit at least every two weeks. Turn the dehumidifier off and disconnect the power plug before cleaning. Use a soft cloth to gently wipe the outer case to remove dust. Vacuum clean the air inlet and outlet grilles of the dehumidifier. Remove the water tank and wash it by hand using a mild detergent. Rinse the water tank with clean water. Note: Do not spray water directly onto the unit. 19. Cleaning the Air Filter To ensure the effectiveness of the dehumidifier, it is recommended to clean the filter at least every two weeks. Remove the water tank. Pull the filter downwards and remove it from the unit. Wash the filter carefully in warm water, use a mild detergent if necessary. Note: Do not wash the filter frame in a dishwasher. 20. Reinstall the Filter Allow the filter to dry completely. Push the filter back upwards into the unit. Place the water tank back in place. Note: DO NOT use the dehumidifier without the air filter frame in place. Troubleshooting 21. The dehumidifier does not work The mains lead is not properly plugged in or there is no power from the wall socket. The water tank is full or incorrectly fitted. The set humidity level has been reached. Power plug or cord damaged. 22. The humidity is not decreasing The dehumidifier has not been used long enough. Make sure that the doors and windows are closed. The ambient temperature is too low. The ambient humidity level is lower than the humidity set. The air filter frame is overly dirty. Exceeded recommended room capacity. 23. Unusual noises The dehumidifier is tilted or standing on an uneven surface. Make sure that the air filter is clean. Loose or foreign particles inside the unit. 24. Buttons don’t work Lock is activated. Long-press the lock button until the lock indicator disappears from the display. 25. Water in tank overflows Water tank may be damaged. Float for water auto-sensor is not in place. Internal drainage passage is blocked or obstructed. 26. Error code CL: Low environmental temperature (below 5 °C) CH: High environmental temperature (above 38 °C) LO: Low environmental humidity (below 20%) HI: High environmental humidity (above 90%) E1 / E2: Humidity sensor error. Contact customer care. Ecofort website Terms Privacy

Product Information

ecoQ DryAir 12L Essential

Materials

Control Panel Description

1. Control Panel

2. Operation

3. Display

Operating Instructions

4. On / Off

5. Mode

6. Humidity Setting

7. Fan Speed

8. Timer

9. Lock

10. 3 Color Air Humidity Light

11. Automatic Shut Off

12. Automatic Defrost Feature

13. Memory Feature

Continuous Drainage

14. Continuous Drainage Function

15. Attach the Drain Hose

16. Position the Hose Correctly

17. Check for Blockages

Cleaning and Maintenance

18. Cleaning the Dehumidifier

19. Cleaning the Air Filter

20. Reinstall the Filter

Troubleshooting

21. The dehumidifier does not work

22. The humidity is not decreasing

23. Unusual noises

24. Buttons don’t work

25. Water in tank overflows

26. Error code